Bench

Test the pull

calls: 0 right · 0 made

Test every part before it goes in a build. Pick a part, then turn the meter's dial to the right mode and the right range. It is the same meter you set up in Module 02. The panel tells you what a good reading looks like. Get the reading, compare it, then decide: keep it or bin it.

Turn the dial to the right mode and range, then read the display.

1 · The part on the bench

Pick a part on the bench.

Readings and thresholds from Unit 06: the motor and winding calls (Hengye), the stepper coil pairs (Hackaday), switch and fuse continuity (Fluke, Monk), the loaded-battery thresholds and the LED figures (Monk).